(Solved) If LCM of two number is 24255 then their HCF can be A)297 B) 315 C) 462 D) 275

-

 Question :

If LCM of two number is 24255 then their HCF can be ........( select one option ). 

 Options: 

 A) 297 

 B) 315 

 C) 462 

 D) 275 


Solution :

As we all know, HCF is a factor of LCM .

therefore , 315 is a factor of 24255.

so that HCF can be a 315 .

all other options are not a factor of 24255.

24255=315 x 77 .

correction option : B 

Comments

Post a Comment

Popular posts from this blog

Explain superposition theorem and use the principle of superposition to find the voltage Vo in the circuit

-
Image
Superposition Theorem Requirement: Power System is a complex network having number of voltage and current sources and number of loads. Now to analyze the network we need to find voltage/current at particular branch or load.  In such cases calculations for thevenin's and norton's theorem becomes difficult. We can use superposition theorem to find voltage/current at any branch or load in complex network. In this theorem only one source considered at a time and total voltage/current is sum of voltage/current obtained by considering individual source.   Statement of Superposition Theorem:
Read more

(Solved) An LVDT is connected to an amplifier of gain 250 the output terminals of which are connected to a 5 V voltmeter. The meter's scale can be read to 1/5th of a division and has 100 divisions in all. Given that a core displacement of 0.5 mm provides an output of 2 mV from the LVDT, find, 1. The sensitivity of the LVDT 2. The sensitivity of the whole system 3. The resolution of the instrument in centimeters

-
Image
 Question : An LVDT is connected to an amplifier of gain 250 the output terminals of which are connected to a 5 V voltmeter. The meter's scale can be read to 1/5th of a division and has 100 divisions in all. Given that a core displacement of 0.5 mm provides an output of 2 mV from the LVDT, find,  1. The sensitivity of the LVDT  2. The sensitivity of the whole system  3. The resolution of the instrument in centimeters Explanation : (a) Sensitivity of LVDT = Output voltage /displacement  Sensitivity of LVDT = 2mV/0.5 mm = 4 mV/mm (b)Sensitivity of whole setup = amplification factor*sensitivity of LVDT  Sensitivity of whole setup = 250*(4 mV/mm) = 1000 mV/mm (c) The resolution of the instrument in centimeters = minimum voltage that can be read by instrument /sensitivity of whole setup  There are 100 divisions to measure upto 5V.  So 1 division can read 5/100 = 0.05V Scale can read 1/5 of a division.  So minimum voltage that can be read = 0.05/5 ...
Read more

(Solved) A step down DC chopper has a resistive load of R = 15 ohm and input Vdc = 200 V. When the chopper remain ON, it's voltage drop is 2.5V. The chopper frequency is 1 kHz. If the duty cycle is 50%, determine: a) Average output voltage b) RMS output voltage c) Chopper efficiency d) The effective input resistance of the chopper

-
Image
Question:   A step down DC chopper has a resistive load of R = 15 ohm and input Vdc = 200 V. When the chopper remain ON, it's voltage drop is 2.5V. The chopper frequency is 1 kHz. If the duty cycle is 50%, determine:  a) Average output voltage  b) RMS output voltage  c) Chopper efficiency  d) The effective input resistance of the chopper Answer: We can get answers directly by applying relevant formulas as shown below.  (a) Average output voltage = 98.75 V (b) RMS output voltage = 139.6536 V (c) Chopper efficiency = 98.75% (d) The effective input resistance = 30.3799 ohm Additional information : Waveforms for step down chopper are shown below : For any queries regarding above solution please comment below. Thank you! 
Read more